READYNAS
Disk Installation Guide
version B
600
Important instruction on how to install hard disks in your ReadyNAS
☼ Prepare for Installation
Read this Guide before you install the disks.
Prepare the follows for the disk installation:
ReadyNAS 600 disk-less system
Disk drive brackets and screw in accessory box
Ethernet cable and power cable
Hard disk drives (not included)
Screw driver (not included)
1 Remove the top cover to access disk cage
ꢁ
ꢀ
ꢂ
Remove the 3 screws in back.
ReadyNAS 600 case (version B)
Remove top cover
2 Install the hard disk mounting brackets
the connector end
Install the bracket
to the new hard disk
4 x
the components
side
the Components Side
F
16 x
Disk installation Accessories
F
Prepare SATA hard disk drives
|