Nortel Networks Network Card BSG12aw ew tw User Manual
Quick Start Guide  
BSG8ew and BSG12aw/ew/tw 1.0  
Business Services Gateway  
Document Status:Standard  
Document Number:NN47928-105  
Document Version: 01.03  
Date: July 2008  
 
3
Quick Start Wizard  
Use this guide to complete the basic configuration of the Business Services Gateway  
(BSG) and to enable remote access configuration.  
You will need the following information from your ISP or network administrator to  
complete the Wizard:  
Login  
Value  
information  
IP address of  
the device  
default:192.168.1.1  
Username  
Password  
default:nnadmin  
default:PlsChgMe!  
WAN  
BSGew  
BSGtw  
BSGaw  
Interface  
Interface type  
Interface  
DSL Name  
Encapsulation Ethernet  
DSL  
mode  
Connection  
Type  
PPPoE  
Framing  
ESF  
SF  
VPI/VCI  
Authentication  
Required  
ISP (PPPoE)  
Name  
Clock source  
Time slot  
Loop Timing User Name  
Local Timing  
Password  
User name  
Password  
Authentication  
required  
User name  
Password  
Host name  
MAC Cloning Enable  
Disable  
MAC Address  
IP Address  
Assignment  
Manual  
Dynamic  
WAN IP  
address  
Subnet Mask  
Quick Start Guide  
 
4
Gateway IP  
Address  
Primary DNS  
Secondary  
DNS  
LAN  
LAN IP address  
Do not change  
Do not change  
LAN subnet  
mask  
DHCP Setup  
Server  
Relay  
None  
DHCP Server  
configuration  
IP Pool Starting Address  
IP Pool End Address  
Wireless  
Country Code  
Wifi Security  
selection  
Open System  
WPA-PSK  
WPA2-PSK  
WEP select key size- 64, 128, 152  
Security Key  
SIP Phone connection  
SIP host  
domain  
SIP central  
server  
Maximum  
Simultaneous  
calls per WAN  
link  
WAN port  
number of permitted calls  
NN47928-105  
 
5
Remote Access  
Remote Access  
Enable remote Telnet  
access  
SSH  
Procedure  
1
2
3
4
Ensure that the BSG is powered up and connected to the Internet.  
Connect a PC to the LAN port of the BSG.  
Open a web browser.  
In the address bar of the browser, enter the LAN IP address of BSG and press Enter.  
Quick Start Guide  
 
6
5
The BSG login page appears.  
6
Enter the user name and password and click the login button to access the device.  
The system information panel appears.  
NN47928-105  
 
7
7
In the navigation panel on the left, click on the Quick Start Wizard option.  
The Quick Start Wizard opens.  
8
Click on the arrow in the middle of the page to continue.  
The Setting Up Your WAN configuration panel appears. The fields on your panel will be  
different depending on which model of BSG you are configuring. Select the appropriate model  
below:  
•
•
•
BSGtw (page 8)  
BSGew (page 9)  
BSGaw (page 10)  
Quick Start Guide  
 
8
BSGtw  
a
Select the interface from the drop down list.  
Select the Framing.  
b
c
d
e
f
Select the Clock Source.  
Enter the Time Slot.  
Select whether Authentication is Required.  
If authentication is required enter the username and password.  
g
Once you have finished entering the information click on the Apply button at the  
bottom of the panel.  
h
Click Next.  
The Setting Up Your LAN configuration panel appears.  
NN47928-105  
 
 
9
BSGew  
a
b
Select the interface from the drop down list.  
Select the Encapsulation mode.  
PPPoE  
Ethernet  
1. Enter ISP name  
1. Select whether to enable or disable the MAC  
Cloning.  
2. Enter the user name  
3. Enter the password  
4. Enter the Host Name.  
2. If MAC cloning is enabled enter the MAC  
address.  
3. Select whether IP address assignment is  
manual or dynamic  
4. If the IP address assignment is manual enter  
the:  
- WAN IP address  
- Subnet Mask  
- Gateway IP Address  
- Primary DNS  
- Secondary DNS  
c
d
Once you have finished entering the information click on the Apply button at the  
bottom of the panel.  
Click Next.  
The Setting Up Your LAN configuration panel appears.  
Quick Start Guide  
 
 
10  
BSGaw  
a
b
c
d
e
f
Select the DSL Name.  
Select the DSL Connection Type.  
Enter the VPI/VCI.  
Select whether Authentication is Required.  
Enter the username.  
Enter the password.  
g
Once you have finished entering the information click on the Apply button at the  
bottom of the panel.  
h
Click Next.  
The Setting Up Your LAN configuration panel appears.  
9
Enter all of the parameters identified by your administrator at the beginning of this guide.  
10 Once you have finished entering the information click on Apply to save the configuration.  
NN47928-105  
 
 
11  
11 Click the Next button at the bottom of the panel to advance to the next panel.  
The Setting up your Wireless configuration panel appears.  
12 Select the Country Code.  
13 Refer to the information at the beginning of this guide for the correct security settings to enter.  
14 Click on Apply to save the configuration.  
15 Click the Next button at the bottom of the panel to advance to the next panel.  
The Setting up Your SIP Phone Connection configuration panel appears.  
16 Enter the SIP Host Domain.  
17 Enter the SIP Central Server address.  
18 Enter the maximum number of Simultaneous Calls permitted across the selected WAN  
interface.  
19 Click on the Apply button to save the configuration.  
20 Click on the Next button at the bottom of the panel.  
Quick Start Guide  
 
12  
21 You have successfully completed the BSG Quick Start Wizard.  
22 Verify all of the information that you have entered is correct. If the information is correct, click  
Continue to save the information. If you want to make changes to the information, click on the  
Change button at the bottom of the page and you will run through the Wizard again.  
NN47928-105  
 

National Instruments Network Card 371685C 01 User Manual
NEC Flat Panel Television LCD3215 User Manual
Nextar GPS Receiver Q4 User Manual
NHT Speaker 29 User Manual
NuTone Dollhouse 667RN User Manual
Omega Stud Sensor DMD 476 User Manual
Panasonic Garage Door Opener CZ RE2C2 User Manual
Panasonic Network Card 2SC2480 User Manual
ParaBody Home Gym 400101 User Manual
Parasound Home Theater System P DD 1500 User Manual