Oregon Scientific Weather Radio WMR88 User Manual

INTRODUCTION  
Wireless Pro Weather Station  
with USB upload  
Model: WMR88 / WMR88A  
Thank you for selecting the Oregon Scientific™ Wireless  
Pro Weather Station with USB upload (WMR88 /  
WMR88A).  
The base station is compatible with other sensors. To  
purchase additional sensors, please contact your local  
retailer.  
USER MANUAL  
CONTENTS  
Sensors with this logo  
unit.  
are compatible with this  
Introduction............................................................... 1  
Packaging contents.................................................. 1  
Base station ........................................................... 1  
Wind sensor .......................................................... 1  
Temperature & humidity sensor ............................. 1  
Rain gauge............................................................. 2  
Accessories - Sensors............................................. 2  
Overview.................................................................... 2  
Top view ................................................................. 2  
Back view............................................................... 2  
LCD display............................................................ 2  
Wind sensor ........................................................... 3  
Rain gauge............................................................. 3  
Outdoor temperature / humidity sensor.................. 3  
NOTE Please keep this manual handy as you use  
your new product. It contains practical step-by-step  
instructions, as well as technical specifications and  
warnings you should know about.  
PACKAGING CONTENTS  
BASE STATION  
4 x AA  
1
UM-3 1.5V batteries  
Getting started.......................................................... 3  
Set up remote wind sensor .................................... 3  
Set up remote temperature / humidity sensor........ 4  
Set up rain gauge................................................... 4  
Set up base station ................................................ 4  
Verify connection...................................................... 4  
Wind sensor ........................................................... 5  
Temperature / humidity sensor............................... 5  
Rain gauge............................................................. 5  
Mounting / placing of sensors................................. 5  
Wind sensor ........................................................... 5  
Temperature / humidity sensor............................... 5  
Rain gauge............................................................. 5  
Clock reception......................................................... 6  
Clock / Calendar ....................................................... 6  
Moon phase............................................................... 6  
Auto scanning function ........................................... 7  
Weather forecast ...................................................... 7  
Temperature and humidity....................................... 7  
Temperature and humidity trend ............................ 7  
Wind chill / direction / speed................................... 7  
UVI / Barometer / Rainfall......................................... 8  
UV Index ................................................................ 8  
Barometer .............................................................. 8  
Rainfall ................................................................... 9  
Upload data to PC software..................................... 9  
Backlight ................................................................... 9  
Reset.......................................................................... 9  
Specifications ........................................................... 9  
Precautions............................................................. 10  
About Oregon Scientific ........................................ 10  
EU declaration of conformity ................................ 10  
FCC statement ........................................................ 11  
1 x USB cable  
1 x base station  
1 x 6V adaptor  
WIND SENSOR  
1 x sensor  
connector  
2 x AA UM-3  
1.5V batteries  
1 x wind sensor (1  
x wind vane above  
and 1 x anemometer  
below)  
4 x screws  
(Type A)  
1 x round  
U- bolt  
TEMPERATURE & HUMIDITY SENSOR  
1 x table stand  
1 x temperature /  
humidity sensor  
1 x wall mount  
bracket  
2 x AAA UM-4  
1.5V battery  
1
 
2. Outdoor wind sensor battery is low  
3. Wind speed level indicator  
4. Wind speed level description  
5. Minimum wind chill is displayed  
6. Wind direction display  
RAIN GAUGE  
Base and funnel:  
2
3
C
UVI / Barometer / Rainfall Area  
1
1
2
3
1
4
1. Rain gauge  
5
6
7
2. Battery compartment  
3. RESET button  
1. UVI / barometer / rainfall reading is displayed  
2. Past 24hrs rainfall is displayed  
3. Outdoor UV / rain sensor battery is low  
4. UVI / barometric pressure (mmHg, inHg or mb) /  
rainfall readings (in or mm) for the current hour  
5. UVI level indicator  
1
2
6. Maximum UV is displayed  
7. UVI / barometric pressure / rainfall historical bar chart  
display  
D
Clock / Calendar / Moon Phase Area  
1
2
1. Funnel  
2. Indicator  
OUTDOOR TEMPERATURE / HUMIDITY  
SENSOR  
3
4
5
6
1. AM / PM  
2. Time zone offset  
3. Timestamp is displayed  
4. Clock signal reception indicator  
5. Time / date / calendar  
6. Moon phase  
5
2
1
3
C
F
4
WIND SENSOR  
1
2
1. LED status indicator  
2. RESET hole  
3. °C / °F: Select temperature unit  
4. CHANNEL switch  
4
5. Battery compartment  
GETTING STARTED  
NOTE Install batteries in the remote sensors before the  
base station matching the polarities (+ and -).  
NOTE Use alkaline batteries for longer usage and  
consumer grade lithium batteries in temperatures below  
freezing.  
3
1. Wind direction  
2. Wind vane casing  
3. Anemometer  
SET UP REMOTE WIND SENSOR  
The wind sensor takes wind speed and direction  
readings.  
4. Solar power socket  
The sensor is battery operated. It is capable of transmitting  
data to the base station wirelessly within an approximate  
operating range of 100 meters (328 feet).  
3
 
To insert batteries:  
SET UP BASE STATION  
NOTE Install batteries in the remote sensors before the  
base station matching the polarities (+ and -).  
2
1
1. Unscrew the anemometer from the wind sensor  
carefully.  
For continuous use, please install the AC adaptor. The  
batteries are for back-up use only.  
2. Insert batteries matching the polarities (+ / -) and  
replace the anemometer. Press RESET after each  
battery change.  
NOTE Make sure the adaptor is not obstructed and is  
easily accessible to the unit.  
NOTE The base station and adaptor should not be  
exposed to wet conditions. No objects filled with liquid,  
such as vases, should be placed on the base station  
and adaptor.  
SET UP REMOTE TEMPERATURE / HUMIDITY  
SENSOR  
The remote sensor can collect data from up to 3 channels.  
To completely disconnect from power, unplug adaptor  
from the mains.  
To set up the remote sensor:  
1. Slide open the battery door.  
2. Slide channel switch to select a channel (1, 2, 3).  
Ensure you use a different channel for each sensor.  
3. Insert the batteries, matching the polarities (+ / -).  
4. Press RESET after each battery change.  
5. Close the battery door.  
To insert batteries:  
SET UP RAIN GAUGE  
The rain gauge collects rain and takes rainfall readings.  
The sensor can remotely transmit data to the base  
station.  
1. Slide open the battery door.  
To set up the rain gauge:  
2. Insert the batteries, matching the polarities (+ / -).  
3. Press RESET after each battery change.  
4. Close the battery door.  
NOTE Do not use rechargeable batteries. It is  
recommended that you use alkaline batteries with this  
product for longer performance.  
2
NOTE Batteries should not be exposed to excessive  
heat such as sunshine or fire.  
1
The battery icon indicator  
following areas:  
may appear in the  
1. Remove screws and slide the cover off in an upwards  
motion.  
AREA  
MEANING  
2. Insertthebatteries(2xUM-3/AA),matchingthepolarities  
(+ / -). Press RESET after each battery change.  
Battery in the base station is  
low.  
adaptor is disconnected.  
Weather Forecast  
Area  
will show when AC  
The displayed channel  
indicates the outdoor sensor  
for which battery is low.  
Temperature or  
Humidity Area  
Wind Speed / Wind  
Direction / Wind Chil  
Area  
Battery in the wind sensor  
is low.  
3
UVI / Barometer /  
Rainfall Area  
Battery in the UV / Rain  
sensor is low.  
3. Remove the fibre tape.  
VERIFY CONNECTION  
Before proceeding to install sensors outside, please verify  
communication to the base station.  
4
 
a. Align the back of the sensor connector to an existing  
pole. Secure in place by inserting the ends of the  
U-bolt into the holes on the sensor connector and  
securing it with washers and bolts.  
WIND SENSOR  
OR  
b. Insert 4 type A screws into the holes of the sensor  
connector. Screw firmly into place, i.e., fence.  
Slide wind vane onto the smaller end of the sensor  
connector.  
Press SELECT until the selected area icon is in the  
top right display area.  
Wind speed: Gently rotate the wind vane and confirm  
a numerical reading on the base station, e.g.,  
.
Wind direction indicator. Move the direction of the  
wind indication and verify the icon moves in the same  
IMPORTANT Ensure that the wind sensor is pointing  
North to enable it to record accurate readings.  
direction  
.
TEMPERATURE / HUMIDITY SENSOR  
TEMPERATURE / HUMIDITY SENSOR  
1. Press SELECT until the selected area icon  
is in  
1.5 m (5 ft)  
the bottom left display area.  
2. Press UP / DOWN to select channel 1  
and verify  
a numerical reading.  
RAIN GAUGE  
1. Press SELECT until the selected area icon  
TIP Ideal placements for the sensor would be in any  
location on the exterior of the home at a height of not  
more than 1.5 m (5 ft) and which can shield it from direct  
sunlight or wet conditions for an accurate reading.  
is in  
the middle right display area.  
2. Press MODE until  
is displayed.  
3. Tilt the tipping funnel on the rain gauge several times  
and verify a numerical reading on the base station.  
TIP If no reading is displayed for a sensor, press the  
SEARCH button on the base station to initiate a wireless  
sensor search.  
MOUNTING / PLACING OF SENSORS  
WIND SENSOR  
Secure the sensor in the desired location using the wall  
mount bracket or table stand.  
NOTE The sensor should be positioned in an open area  
away from trees or other obstructions.  
RAIN GAUGE  
a
b
The base station and rain gauge should be positioned  
within an effective range: about 100 meters (328 feet)  
in an open area.  
The rain gauge should be mounted horizontally about 1  
meter (3 feet) from the ground in an open area away from  
trees or other obstructions to allow rain to fall naturally  
for an accurate reading.  
Secure the sensor connector in the desired location:  
5
 
To ensure a level plane:  
2. Press and hold SEARCH.  
Put a few drops of water on the cross at the base of the  
funnel to check the horizontal level.  
appears when it is enabled.  
NOTE For best reception, the base station should be  
placed on a flat, non-metallic surface near a window in an  
upper floor of your home. The antenna should be placed  
away from electrical appliances and not be moved around  
when searching for a signal.  
1
3
2
CLOCK / CALENDAR  
4
To set the clock manually, disable the clock signal  
reception first.  
To manually set the clock:  
(You only need to set the clock and calendar if you have  
disabled the clock radio reception.)  
Water will pool to the center of the cross when the rain  
gauge is level.  
If water remains on 1-4, the gauge is not horizontal.  
If necessary, adjust the level using the screw.  
1. Press SELECT to navigate to the Clock Area.  
will  
show next to the Area.  
2. Press and hold MODE to change the clock setting.  
The setting will blink.  
3. Press UP / DOWN to increase / decrease the setting  
value.  
4. Press MODE to confirm.  
5. Repeat steps 3 to 4 to set the time zone offset hour  
(+ / -23 hours), 12 / 24 hour format, hour, minute,  
year, date / month format, month, date and weekday  
language.  
NOTE For best results, ensure the base is horizontal to  
Time zone offset sets the clock +/- 23 hours from the  
received clock signal time. If you have deactivated the  
clock signal reception, do not set a value for time zone.  
allow maximum drainage of any collected rain.  
TIP Press RESET button on base station to erase all  
testing data.  
NOTE If you enter +1 in the time zone setting, this will  
give you your regional time plus 1 hour.  
CLOCK RECEPTION  
This product is designed to synchronize its calendar  
clock automatically once it is brought within range of a  
radio signal:  
If you are in the US (WMR88A only) set the clock to:  
PA for Pacific time  
CE for Central time  
MO for Mountain time  
EA for Eastern time  
WMR88:  
EU: DCF-77 signal: within 1500 km (932 miles) of  
Frankfurt, Germany.  
NOTE The weekday is available in English, German,  
French, Italian, Spanish or Russian.  
UK: MSF-60 signal: within 1500 km (932 miles) of  
Anthorn, England.  
To change the clock display:  
WMR88A:  
WWVB-60 signal: within 3200km (2000 miles) of Fort  
Collins Colorado.  
1. Press SELECT to navigate to the Clock Area. will  
show next to the Area.  
2. Press MODE to toggle between:  
WMR88 only - slide the EU / UK switch to the appropriate  
setting based on your location. Press RESET whenever  
you change the selected setting.  
Clock with seconds  
Clock with weekday  
Calendar  
The reception icon will blink when it is searching for a  
signal. If the radio signal is weak it can take up to 24  
hours to get a valid signal reception.  
MOON PHASE  
The Calendar must be set for this feature to work (see  
Clock / Calendar section).  
indicates the status of the clock reception signal.  
ICON  
MEANING  
New  
Full Moon  
Moon  
Time is synchronized.  
Receiving signal is strong  
Waxing  
Crescent  
Waning  
Gibbous  
Time is not synchronized.  
Receiving signal is weak  
First  
quarter  
Third  
quarter  
To enable (and force a signal search when previous  
search was unsuccessful) / disable the clock radio  
reception:  
Waxing  
Gibbous  
Waning  
Crescent  
1. Press SELECT to navigate to the Clock / Calendar /  
Moon phase Area.  
will show next to the Area.  
6
 
To view temperature (Current / Max / Min temperature)  
readings:  
AUTO SCANNING FUNCTION  
To activate the outdoor temperature and humidity  
auto-scan function:  
1. Press SELECT to navigate to the Temperature Area.  
will show next to the Area.  
1. Press SELECT to navigate to the Temperature or  
2. Press UP / DOWN to select the channel.  
3. Press MAX / MIN to toggle between current / MAX /  
MIN displays.  
Humidity Area.  
will show next to the Area.  
2. Press and hold MODE to activate auto-scan. The  
temperature and humidity display will scroll from  
indoor to ch1 through to ch3.  
To view humidity (Humidity, Dew point) readings:  
1. Press SELECT to navigate to the Humidity Area.  
will show next to the Area.  
3. Press any key to stop the auto-scan.  
NOTE Channel 1 is used for the outdoor temperature  
and humidity sensor.Additional temperature and humidity  
sensors can use other channels.  
2. Press UP / DOWN to select the channel.  
3. Press MODE repeatedly to toggle between the  
humidity / dewpoint displays.  
WEATHER FORECAST  
4. Press MAX / MIN to toggle between current / MAX /  
MIN displays.  
This product forecasts the next 12 to 24 hours of weather  
forecast within a 30-50 km (19-31 mile) radius.  
The timestamp is displayed accordingly in the Clock  
Area.  
Weather Forecast Area  
ICON  
DESCRIPTION  
To clear the memories and timestamp for the  
temperature, humidity and dew point readings:  
Sunny  
In the Temperature or HumidityArea, press and hold MAX  
/ MIN to clear the readings.  
Partly cloudy  
Cloudy  
NOTE The dew point advises at what temperature  
condensation will form.  
TEMPERATURE AND HUMIDITY TREND  
Rainy  
The trend lines are shown next to the temperature and  
humidity readings. The trend is shown as follows:  
RISING  
STEADY  
FALLING  
Snowy  
WIND CHILL / DIRECTION / SPEED  
TEMPERATURE AND HUMIDITY  
The weather station displays indoor and outdoor  
readings for:  
The base station provides  
wind speed and wind  
direction information.  
1. Temperature / relative humidity (current / maximum  
/ minimum)  
2. Trend line  
To read the wind direction  
find the compass point the  
is pointing to.  
3. Wind chill (current / minimum) and dew point level  
(current / maximum / minimum)  
The weather station can connect up to 3 remote  
sensors.  
The timestamp records the date and time when storing  
the wind speed readings.  
NOTE Channel 1 is dedicated for outdoor temperature  
and humidity.  
To select the wind speed unit:  
shows which remote sensor’s data you are  
viewing.  
Press UNIT to switch between:  
Metres per second (m/s)  
Kilometers per hour (kph)  
Miles per hour (mph)  
Knots (knots)  
appears when indoor data is displayed.  
The timestamp records the date and time when storing the  
temperature and humidity readings in memory.  
To select the temperature measurement unit:  
Press UNIT to select °C / °F.  
NOTE The unit of all temperature related displays will  
be changed simultaneously.  
7
 
To view the UV / Barometer / Rainfall readings:  
1. Press SELECT to navigate to the UV / Barometer /  
Rainfall Area. will show next to the Area.  
2. Press MODE to toggle between UVI / Barometer  
/ Rainfall readings. The corresponding icon will  
appear:  
The wind level is shown by a series of icons:  
ICON  
LEVEL  
DESCRIPTION  
N/A  
<2 miles/h (<4km/h)  
Light  
2-8 miles/h (3-13 km/h)  
9-25 miles/h (14-41 km/h)  
26-54 miles/h (42-87 km/h)  
>55 miles/h (>88 km/h)  
UVI  
BAROMETER  
RAINFALL  
Moderate  
Strong  
Storm  
To select the measurement unit for the barometer or  
rainfall readings:  
In the UV / Barometer / Rainfall Area, press UNIT to  
switch between:  
Barometer: Millimeters of mercury (mmHg), inches  
of mercury (inHg), millibars per hectopascal (mb).  
Rainfall: Millimeters (mm), inches (in), recorded for  
that hour.  
To view the maximum wind speed and minimum wind  
chill readings:  
1. Press SELECT to navigate to the Wind Speed / Wind  
Direction / Wind Chill Area.  
Area.  
will show next to the  
NOTE As the purpose of the bar graph is only to provide  
a quick comparison between the records of the past 24  
hours, the vertical axis cannot convert from inches to mm.  
Therefore, changing the measurement unit will have no  
effect on the bar graph display.  
2. Press MAX / MIN to toggle between current / MAX  
wind speed and current / MIN wind chill displays.  
The timestamp of when maximum wind speed was  
recorded is displayed accordingly in the Clock Area.  
UV INDEX  
To clear minimum wind chill reading / maximum wind  
speed reading:  
The UV index levels are as follows:  
1. Press SELECT to navigate to the Wind Speed / Wind  
UV INDEX  
0-2  
DANGER LEVEL  
Low  
ICON  
Direction / Wind Chill Area.  
Area.  
will show next to the  
3-5  
Moderate  
High  
2. Press MAX / MIN repeatedly until minimum wind  
chill reading or maximum wind speed reading is  
displayed.  
6-7  
8-10  
Very high  
Extremely high  
3. Press and hold MAX / MIN to clear the readings.  
11 and above  
NOTE The wind chill factor is based on the combined  
effects of temperature and wind speed. Displayed wind  
chill is calculated solely from Channel 1 sensor.  
To view the maximum UV reading:  
1. Press SELECT to navigate to the UVI / Barometer /  
Rainfall Area. will show next to the Area.  
2. Press MODE repeatedly to select UV display.  
3. Press MAX / MIN to toggle between current / MAX  
UV index display.  
UVI / BAROMETER / RAINFALL  
The weather station works with one UV sensor and  
one rain gauge. The station is capable of storing and  
displaying the hourly history data for the last 10 hours  
of UV index, and 24 hours of rainfall and barometric  
pressure readings.  
The timestamp of when maximum UV was recorded is  
displayed accordingly in the Clock Area.  
To clear maximum UV reading:  
1. Press SELECT to navigate to the UVI / Barometer /  
UVI  
BAROMETER  
RAINFALL  
Rainfall Area.  
will show next to the Area.  
2. Press MODE repeatedly to select UV display.  
3. Press and hold MAX / MIN to clear the readings.  
BAROMETER  
To set the altitude level compensation for the  
Barometer readings:  
The bar chart display shows the current and historical  
data for the UV index, barometric pressure and rainfall  
readings.  
1. Press SELECT to navigate to the UVI / Barometer /  
Rainfall Area.  
will show next to the Area.  
2. Press MODE repeatedly to select Barometric  
display.  
NOTE The number shown in the horizontal axis (Hr)  
indicates how long ago each measurement was taken (e.g.  
3 hours ago, 6 hours ago, etc.). The bar represents the  
measurement taken for that specific 1 hour period. E.g., if it  
is 10:30 pm now, the bar plotted directly above -1 shows the  
reading recorded from 9 to 10 pm and -6 shows the reading  
recorded earlier in the evening, between 4pm-5pm.  
3. Press and hold MODE to enter the altitude setting.  
4. Press UP / DOWN to increase / decrease the setting  
value.  
5. Press MODE to confirm the setting.  
8
 
RAINFALL  
SPECIFICATIONS  
BASE STATION  
To view the recorded rainfall of the current hour or  
last 24 hours:  
Dimensions  
(L x W x H)  
180mm x 110mm x 47mm  
(7.1 x 4.3 x 1.9 inches)  
1. Press SELECT to navigate to the UVI / Barometer /  
Rainfall Area.  
will show next to the Area.  
Weight  
286g (10 ounces) without  
battery  
2. Press MODE repeatedly to select Rainfall display.  
3. Press MAX / MIN repeatedly to toggle between  
current hour or past 24 hour rainfall.  
Battery  
6V adaptor; 4 x UM-3 (AA) 1.5V  
INDOOR BAROMETER  
UPLOAD DATA TO PC SOFTWARE  
Barometer unit  
Measuring range  
Accuracy  
mb, inHg and mmHg  
NOTE The software must be downloaded and installed  
before data can be uploaded (refer to Installation  
Guide).  
700 – 1050mb/hPa  
+/- 10 mb/hPa  
NOTE The USB is only used for uploading data. It cannot  
be used for charging battery power.  
Altitude setting  
Sea level  
User setting for compensation  
1. After successful installation, double click on  
desktop shortcut.  
Weather display  
Memory  
Sunny, Partly Cloudy, Cloudy,  
Rainy and Snowy  
2. Click Display in Oregon Scientific Weather Station  
dialogue box.  
Historical data and bar chart for  
last 24hrs  
3. You will be prompted to select model number. Please  
select your model in the drop-down list and refer to  
the image next to your selection to confirm it is the  
correct model.  
INDOOR TEMPERATURE  
Temp. unit  
°C / °F  
Displayed range  
Operating range  
Accuracy  
0°C to 50°C (32°F to 122°F)  
-30°C to 60°C (-4°F to 140°F)  
3
0°C - 40°C: +/- 1°C (+/- 2.0°F)  
40°C - 50°C: +/- 2°C (+/- 4.0°F)  
Memory  
Current, Min and Max temp.  
Dew Point w/ Min and Max  
INDOOR RELATIVE HUMIDITY  
Displayed range  
Operating range  
Accuracy  
2% to 98%  
4. Plug one end of the USB cable into the base station’s  
USB port and the other end into the PC’s USB port.  
25% to 90%  
25% - 40%: +/- 7%  
40% - 80%: +/- 5%  
80% - 90%: +/- 7%  
Main unit will show  
.
5. Uploading will start immediately.  
Memory  
Current, Min and Max  
NOTE This product should be supplied by an identical  
USB port complying with the requirements of Limited  
Power Source.  
RADIO-CONTROLLED / ATOMIC CLOCK  
To learn more about how to utilize the functions available  
on the software, please refer to PC Software Manual,  
downloadable from:  
Synchronization  
Clock display  
Hour format  
Calendar  
Auto or disabled  
HH:MM:SS  
12hr AM/PM or 24hr  
DD/MM or MM/DD  
(E, G, F, I, S, R)  
Click on  
PC Software Manual.  
Weekday in 6  
languages  
BACKLIGHT  
Press LIGHT to activate the backlight for 5 seconds.  
REMOTE WIND SENSOR UNIT  
Dimensions  
(L x W x H)  
178 x 76 x 214 mm  
(7 x 3 x 8.4 inches)  
RESET  
Press RESET to return to the default settings.  
Weight  
100 g (3.53 ounces) without  
battery  
Wind speed unit  
Speed accuracy  
m/s, kph, mph, knots  
2 m/s ~ 10 m/s (+/- 3 m/s)  
10 m/s ~ 56 m/s (+/- 10%)  
Direction accuracy  
16 positions  
Transmission of  
Approx. every 56 seconds  
wind speed signal  
9
 
Please note that some units are equipped with a  
battery safety strip. Remove the strip from the battery  
compartment before first use.  
Memory  
Battery  
Max wind speed  
2 x UM-3 (AA) 1.5V batteries  
OUTDOOR TEMPERATURE / HUMIDITY UNIT  
NOTE The technical specifications for this product and  
the contents of the user manual are subject to change  
without notice.  
Dimensions  
(L x W x H)  
92 x 60 x 20 mm  
(3.6 x 2.4 x 0.79 in)  
Weight  
62 g (2.22oz) without battery  
5% to 95%  
NOTE Features and accessories will not be available  
in all countries. For more information, please contact  
your local retailer.  
Humidity range  
Temp. unit  
°C / °F  
Temperature  
-30°C to 60°C (-22°F to 140°F)  
outdoor range  
ABOUT OREGON SCIENTIFIC  
RF frequency  
Range  
433 MHz  
more about Oregon Scientific products.  
Up to 100 meters (328 feet)  
with no obstructions  
If you’re in the US and would like to contact our  
Customer Care department directly, please visit: www2.  
oregonscientific.com/service/support.asp  
Transmission  
Channel no.  
Batteries  
Approx. every 102 seconds  
3
For international inquiries, please visit: www2.  
oregonscientific.com/about/international.asp  
2 x UM-4 (AAA) 1.5V  
REMOTE RAIN GAUGE  
Dimensions  
(L x W x H)  
114 x 114 x 145 mm  
EU DECLARATION OF CONFORMITY  
(4.5 x 4.5 x 5.7 inches)  
241 g (8.5 oz) without battery  
Mm and in  
Hereby, Oregon Scientific, declares that this Wireless  
Pro Weather Station with USB upload (Model: WMR88 /  
WMR88A)isincompliancewiththeessentialrequirements  
and other relevant provisions of Directive 1999/5/EC. A  
copy of the signed and dated Declaration of Conformity is  
available on request via our Oregon Scientific Customer  
Service.  
Weight  
Rainfall unit  
Range  
0 mm – 9999 mm  
Accuracy  
< 15 mm: +/- 1 mm  
15 mm to 9999 mm: +/- 7%  
Memory  
Past 24hrs, hourly from last  
memory reset  
Battery  
2 x UM-3 (AA) 1.5V  
PRECAUTIONS  
COUNTRIES RTTE APPROVAL COMPLIED  
Do not subject the unit to excessive force, shock,  
dust, temperature or humidity.  
All EU countries, Switzerland CH  
Do not cover the ventilation holes with any items such  
as newspapers, curtains etc.  
und Norwegen  
N
Do not immerse the unit in water. If you spill liquid  
over it, dry it immediately with a soft, lint-free cloth.  
Do not clean the unit with abrasive or corrosive  
materials.  
Do not tamper with the unit’s internal components.  
This invalidates the warranty.  
Only use fresh batteries. Do not mix new and old  
batteries.  
Images shown in this manual may differ from the  
actual display.  
When disposing of this product, ensure it is collected  
separately for special treatment and not as household  
waste.  
Placement of this product on certain types of wood  
may result in damage to its finish for which Oregon  
Scientific will not be responsible. Consult the furniture  
manufacturer's care instructions for information.  
The contents of this manual may not be reproduced  
without the permission of the manufacturer.  
Do not dispose old batteries as unsorted municipal  
waste. Collection of such waste separately for special  
treatment is necessary.  
10  
 
FCC STATEMENT  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1)  
This device may not cause harmful interference, and  
(2) This device must accept any interference received,  
including interference that may cause undesired  
operation.  
WARNING Changes or modifications not expressly  
approved by the party responsible for compliance could  
void the user’s authority to operate the equipment.  
NOTE This equipment has been tested and found  
to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against  
harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there is  
no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful  
interference to radio or television reception, which can  
be determined by turning the equipment off and on, the  
user is encouraged to try to correct the interference by  
one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio / TV  
technician for help.  
DECLARATION OF CONFORMITY  
The following information is not to be used as contact  
for support or sales. Please call our customer service  
com), or on the warranty card for this product) for all  
inquiries instead.  
We  
Name:  
Address:  
Oregon Scientific, Inc.  
19861 SW 95th Ave.,Tualatin,  
Oregon 97062 USA  
Telephone No.:  
1-800-853-8883  
declare that the product  
Product No.:  
WMR88 / WMR88A  
Product Name:  
Wireless Pro Weather Station with  
USB upload  
Manufacturer:  
Address:  
IDT Technology Limited  
Block C, 9/F, Kaiser Estate,  
Phase 1,41 Man Yue St.,  
Hung Hom, Kowloon,  
Hong Kong  
is in conformity with Part 15 of the FCC Rules. Operation  
is subject to the following two conditions: 1) This device  
may not cause harmful interference. 2) This device must  
accept any interference received, including interference  
that may cause undesired operation.  
11  
 

Miller Electric Welder Auto Axcess 675 User Manual
NETGEAR Computer Drive WNA3100M User Manual
Nlynx Network Card ETU400 User Manual
NordicTrack Home Gym NEL07940 User Manual
N Tron Switch 202MC User Manual
OEM Systems Car Video System CH 4100 User Manual
Optoma Technology Projection Television RD65 User Manual
Palsonic CRT Television 6850TGPF User Manual
Panasonic Network Card 2SD1149 User Manual
Paradyne Network Hardware Broadband Services Switch User Manual